diamond burs hp/2.35mm

Good Materials | CE & ISO 13485 Certificates | All Range of Shapes & Grits

Sharp and Durable, Grind or polish Ceramics.

ball round diamond burs hp low speed dental burs for wholesale

Ball round diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

inverted cone diamond burs hp low speed dental burs for wholesale

Inverted cone diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.


wheel diamond burs hp low speed dental burs for wholesale

Wheel diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

cylinder diamond burs hp low speed dental burs for wholesale

Cylinder diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

round cylinder diamond burs hp low speed dental burs for wholesale

Round cylinder diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.


needle diamond burs hp low speed dental burs for wholesale

Needle diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

taper diamond burs hp low speed dental burs for wholesale

Taper diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

round taper diamond burs hp low speed dental burs for wholesale

Round taper diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

pearl diamond burs hp low speed dental burs for wholesale

Pearl diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

flame football diamond burs hp low speed dental burs for wholesale

Flame football diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

torpedo diamond burs hp low speed dental burs for wholesale

Torpedo diamond burs HP are ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials, and also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving. They can be used as glass drill, diamond drill bit, jewelry drill and little engraving.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

good materials

Made by plating good-quality diamond particles on stainless steel shanks by a galvanic process.

images

images

with ce & iso 13485 certificates

All products have been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements.


four types of grits of diamond burs hp

Industry standards, use fine, medium, coarse and super coarse diamonds for all range of HP diamond burs.
Black: Super Coarse
Green: Coarse
Blue: Medium
Red: Fine

images

images

shank type

HP bur shank is 44.5 mm long. HP shank diameter is 2.35mm. HP burs are used in the low speed handpiece and HP bur can be autoclaved.



benefits of diamond burs hp

1. HP bur can be autoclaved. These large burs can drill through thick bone for. surgical, orthopaedic and endodontic work.
2. Most modern, safe and long-lasting diamond coating electroplating process, optimal working results.
3. Ideal for molding and gross reduction, great work on PFM, chrome & ceramic materials.
4. Also for grinding and engraving on metal, wood, bone, jade, PVC, glass and stone carving, it can be used as glass drill, diamond drill bit, jewelry drill and little engraving.
5. Diamond grain is evenly distributed in high density, sharp and durable.

images

Customers' Review

Faq

What are differences between diamond burs FG, RA and HP?


There are three main types of shank - Friction Grip Shank (FG), Latch-type Shank. (RA) and Long Straight Shank (HP).

FG (Friction Grip)
FG burs fit into the turbine of high speed handpieces. The shank diameter is 1.60 mm. The standard length is 20mm long, but longer surgical lengths are available and these are commonly needed for veterinary work.

RA/CA (Right Angle)
RA burs fit into the latch of the contra-angle on slow speed handpieces. They are generally 20mm long with a 2.35mm diameter shank.

HP (Long Straight)
HP burs fit into the nose cone of the slow speed handpieces once the prophy angle or contra angle is removed. They are used for diamond cutting discs or long 40mm burs with a 2.35mm diameter shank.

HP, RA, FG (from left to right)


What are differences between diamond burs and carbide burs? How to choose them?


(1) Precision: Diamond burs are composed of diamond grit and mostly used for grinding.
Carbide burs, which are composed of tungsten carbide, are excellent for cutting.
Thus, diamond bur grinding is superior to carbide bur cutting. With diamond burs, there is also a reduced risk of damaging the inner pulp area of the tooth.


(2) Durability: Both diamond and carbide are exceptionally durable substances.  However, diamond burs lose cutting effectiveness more dramatically than carbide burs over time, resulting in a shorter lifespan.

(3) Usages: Both Tungsten carbide burs and diamond burs can be utilized for deburring, finishing, smoothing, and shaping. But Tungsten carbide burs are more resistant to high temperatures than other materials, allowing them to operate for longer periods.
Diamond burs are more useful for carving into stone as compared to tungsten carbide burs, so the main choice selection of material is dependent on the application.

(4) Smoothness: Carbide burs cut and chip away the tooth structure, as opposed to grinding it like diamond burs do, resulting in a far smoother finish than diamond burs.

(5) Zirconia cutting burs: Cutting and removing zirconia crowns can be rather difficult. Diamond burs are more suitable for the task than carbide burs due to their high-speed grind. The same remains good for ceramic crown fabrication.

As a result, When ultra-precision cutting is required, diamond burs are a better option than carbide burs.


What are differences between electroplated diamond burs and sintered diamond burs?


An electroplated diamond burs has a diamond grit layer electroplated to the surface of the bur.
A sintered diamond bur has several layers of diamond particles spread throughout the head of the bur to make it longer lasting and more durable.

(1) Cost: Electroplated diamond burs are usually 4-5x cheaper than sintered diamond burs.

(2) Durability: Sintered diamond burs are more durable than electroplated diamond burs. And when used correctly they will last ten times longer than electroplated diamond burs. They will never become as dull as electroplated diamond burs.

(3) Cutting and Precision: Sintered diamond burs tend to cut significantly more precisely and cleanly than electroplated diamond burs. When attempting to carve intricate lines in a gemstone, the sintered bur will be more exact. Use the sintered diamond bur if you're concerned about the gemstone chipping or if you want to achieve great detail.

(4) Application: Most gemstone carvers like a variety of electroplated diamond burs for the initial carving and form. Then, return with a sintered bur to refine your cuts and lines.

Electroplated diamond burs are preferred by gemstone carvers for large gemstone carvings because they are easier and less expensive to obtain large electroplated diamond burs than huge sintered diamond burs.
Cutters of fire agate favor sintered diamond burs due to the precision required to show the gemstone's colors.


What’s the packing? How many pcs in a pack?


For diamond burs HP, there are 15 pcs in a pack.
The packing is as follow:

article

How to Use Diamond Burs to Engrave Stainless Steel Bottle?

Diamond burs can come in a variety of shapes and sizes,and with different functions, and can provide a faster and more consistent cut when cutting requires an exceptionally high level of precision. In this post we are talking about the content about how to use Diamond Burs to engrave stainless steel bottle.
View Details