tungsten carbide burs

Good Materials | CE & ISO 13485 Certificates | All Range of Shapes | Long Lifespan | Withstand High Temperatures | High Cutting Performance

Tungsten Carbide Burs. HP: 
Shape: S1, ISO 001, Round; S2, ISO 002, Inverted cone; S21, S31, ISO 107, Cylinder; S33, ISO 168, Taper; S31R, ISO 137, Round, Cylinder

Tungsten Carbide Burs for Milling Machines:
Precisely match Various System; Extra-long working life & high cutting capacity; Used for trimming, polishing implant teeth shoulders; Milling precious or Non-precious metals or Titanium.

ball round tungsten carbide burs hp low speed lab laboratory burs for wholesale

Ball round tungsten carbide burs HP are ideal for initial entry, excavating infected dentin, extending preparation walls, creating retentive features, and endodontic access. Smaller head diameters help create ultra-conservative preparations. They are popular among jewelers for deburring, enlarging holes, and drilling, as well as for engraving or texturing jewelry.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

inverted cone tungsten carbide burs hp low speed lab laboratory burs for wholesale

Inverted cone tungsten carbide burs HP are used as excavating burs, ideal for creating mechanical locks in preparations, and well suited for making undercuts in both dental and jewelry applications.


Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

flat end cylinder tungsten carbide burs hp low speed lab laboratory burs for wholesale

Flat end cylinder tungsten carbide burs HP create preparation with parallel walls and a flat floor, useful for establishing the periphery of a preparation. Cross-cuts increase cutting efficiency and facilitate cutting dentin at lower speeds for improved tactile response. Dome ends create rounded internal line angles to distribute occlusal forces


Cut: HP55-HP63 cross cut; HP555-HP563 cross cut fissure; Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

flat end taper tungsten carbide burs hp low speed lab laboratory burs for wholesale

Flat end taper tungsten carbide burs HP create diverging preparation walls, ideal for indirect restorations. Cross-cut increase cutting efficiency. Dome ends create rounded internal line angles to distribute occlusal forces better. Tapered shape helps maintain full-length enamel rod margins on convex tooth surfaces.


Cut: HP698-HP704 cross cut; HP699L-HP703L cross cut fissure; Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

round end cylinder tungsten carbide burs hp low speed lab laboratory burs for wholesale

Round end cylinder tungsten carbide burs HP are ideal for a quick removal of crowns amalgam and composite materials, and orthodontics, and well suited for jewelry applications. 

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

flat end cylinder tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Flat end cylinder tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

round end cylinder tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Round end cylinder tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

ball round tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Ball round tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

bullet tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Bullet tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.


flame football tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Flame football tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

needle tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Needle tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

pear tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Pear tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

pointed end cylinder tungsten carbide cutters hp low speed lab laboratory burs for wholesale

Pointed end cylinder tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.

tungsten carbide burs for milling machines hp low speed lab laboratory burs for wholesale

Tungsten carbide burs for milling machines are used for trimming, polishing implant teeth shoulders, milling precious or non-precious metals or titanium. They recisely match various system with extra-long working life & high cutting capacity.

Head Sizes: 0.1mm - 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm

good materials

A tungsten carbide bur consists of a good-quality tungsten carbide head and a stainless steel shank.
Tungsten carbide is a metal that is extremely hard (about three times stiffer than steel) and can withstand high temperatures. Because of the hardness, a carbide bur can maintain a sharp cutting edge and be used many times without becoming dull.

images

images

with ce & iso 13485 certificates

All products have been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements.


six main types of cuts of carbide cutters

images

images

shank type

HP bur shank is 44.5 mm long. HP shank diameter is 2.35mm. HP burs are used in the low speed handpiece and HP bur can be autoclaved.



benefits of tungsten carbide burs hp

Tungsten Carbide Burs HP:
1. Perfect for Prophylaxis and oral surgery; Preparation of cavities; removal of old fillings; treatment of filings; preparation of crowns.

2. Also used as engraving bits, carving bits. It’s applied to alloy, metal, ceramics, jewelry, stones, hard wood, etc.
3. Tungsten carbide burs are 3 times stiffer than steel. Because Tungsten Carbide is such a hard material, it is able to maintain sharpness, making it a highly effective cutting tool.
4. Tungsten carbide burs cut rather than grinding as diamond burs do, which leaves a much smoother finish.
5. Due to tungsten carbide burs using blades they are able to reduce vibrations.
6. Tungsten carbide burs are more resistant to high temperatures than other materials, allowing them to operate for longer periods.
7. These burs can also be used on a wide variety of materials, such as gold, silver and acrylics. In addition, they last a long time without chipping or breaking.
8. High concentricity, high hardness, no rust, wear-resistant, precision-ground and rugged.

Tungsten Carbide Cutters HP:
1. Tungsten carbide cutters are precision instruments with high cutting capacity and can withstand high temperatures. There are a wide range of shapes and cuts. This allows trimming of all dental materials.
2. Tungsten carbide cutters in the daily work in a laboratory are used for trimming plaster models, producing crowns and bridges made of precious metal alloys as well as alloys, for veneering (composites and porcelain) but also for metal framework, for trimming denture acrylics and ceramics as well as for the production of auxiliaries (such as model resin, tray material).
3. Shaping fissure on a variety of materials. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
4. The extreme surface hardness ensures a long service life and high cost effectiveness.


images

Customers' Review

Faq

What are differences between carbide burs FG, RA and HP?


There are three main types of shank - Friction Grip Shank (FG), Latch-type Shank. (RA) and Long Straight Shank (HP).

FG (Friction Grip)
FG burs fit into the turbine of high speed handpieces. The shank diameter is 1.60 mm. The standard length is 20mm long, but longer surgical lengths are available and these are commonly needed for veterinary work.

RA/CA (Right Angle)
RA burs fit into the latch of the contra-angle on slow speed handpieces. They are generally 20mm long with a 2.35mm diameter shank.

HP (Long Straight)
HP burs fit into the nose cone of the slow speed handpieces once the prophy angle or contra angle is removed. They are used for diamond cutting discs or long 40mm burs with a 2.35mm diameter shank.

HP, RA, FG (from left to right)



What are various usages of tungsten carbide cutters of different cuts?


There are six main types of cuts for tungsten carbide cutters.

What’s the packing? How many pcs in a pack?


For tungsten carbide burs HP, there are 10 pcs in a pack.
The packing is as follow:


For tungsten carbide cutter, there is 1 pc in a pack.
The packing is as follow:

article