FlexSoft Partial Dentures B1 Standard Pink 9g Cartridge

FlexSoft Partial Dentures B1 - Standard Pink 9 g cartridge

FlexSoft Partial Dentures is a flexible thermoplastic denture material for dental laboratories. It is an alternative to conventional partial denture materials and is designed to be flexible, soft, easy to finish and easy to polish.

Key Features

• Flexible and soft denture base material for laboratory fabrication.
• Easy-to-finish and easy-to-polish surface after injection and trimming.
• Suitable for partial dentures, complete dentures, occlusal splints and nightguards.
• Available in Deep Pink, Standard Pink, Light Pink and Crystal shades.

This Model

• Model: B1
• Color: Standard Pink
• Pack Size: 9 g cartridge
• Package Quantity: 9 g × 10 cartridges

Applications

Recommended for partial and complete dentures, occlusal splints and nightguards. Not recommended for small unilateral restorations.

Processing Guidance

• Block out undercuts that affect the path of insertion before duplication; retain areas needed for retention.
• Suggested wax-up thickness: palatal 1.2-1.5 mm, buccal/labial flange 1.2-2.0 mm, clasps 1.0-1.5 mm, lingual flange 1.2-2.0 mm, mandibular lingual major connector 1.7-2.0 mm.
• Preheat cartridge sleeve to approximately 550°F / 290°C for about 15 minutes; heat cartridge for 12 minutes before injection.
• Keep maximum downward pressure for about 3 minutes after injection, then allow the flask to cool for at least 30 minutes before deflasking.

Finishing & Polishing

Cut off sprues, trim edges carefully and avoid overheating. Smooth scratches with rubber wheels. Polish with pumice or another coarse dental abrasive on a wet rag wheel, then apply final shine with a hi-shine compound at low speed.

Safety Notes

Use eye protection and heat-resistant gloves during injection. Use proper ventilation, vacuum extraction and masks when grinding prosthodontic resins. Inject opened cartridges within 1 hour.